RE: #998DR Rechargeable LCD Shock Vibra Remote Control Dog Training Collar
Color: black Size: Approx. 125 x 45 x 30mm ( remote control ), Approx. 70 x 40 x 35mm ( receiver ) Product parameters: 1. With LCD screen on remote control 2. Work modes: shock, vibration, buzzer, flash 3. Vibration series: 100 Level, static series: 100 Level, control through the up&down button 4. Remote distance: 300m 5. The receiver will turn off automatically if it is unsed for 4 mins. Any movement will activate the receiver into standby mode. The transmitter will go into standby mode if there is no operation after 20 seconds and turn off after 2 minute. 6. Built-in Lithium battery, rechargeable and waterproof The remote control products must be matched when they are used at the first time, or the remote control can not be used normally. The following steps is the simple match test: Matching process: Firsr: put the batteries into the remote control, and obsever if the indicators and keys are energized Second: put the batteries into the collar, then the collar will have a short electricity tip ( vibration or hum ), indicators on ( if with indicators ). Note: don't repeat loading and unloading batteries within 15s, or easy to cause circuit board burned. Third: Key step --- Assemble the product in order, within 10s after the collar is energized ( the collar is in matching mode ), please push the confirm key or function key of the remote control, the first time the collar receive the singal will not work, but it will change accordingly, it means match successfull (details see instructions) Note: if match unsuccessfully ( normally the collar doesn't receive the singal within 10s, out of matching mode ), please unload the batteries from the collar, and load after 15s, then match again. 1 X remote control 1 X receiver 1 X collar 1 X charger 1 X USB cable 1 X testing light 4 X metal probe 1 X user manual ( in English ) |
No comments:
Post a Comment